The sediment in our water systems is created by the silt, sand, rust, and clay that naturally occurs. These tiny particles can get washed into a system after heavy rainstorms which increases their volume with greater velocity and frequency than normal.
Sediment is made up of organic materials like silt, sand, or dirt that are usually found within the earth’s natural habitats but they also accumulate to an alarming degree when there has been a lot of rainfall due to washing them around at increased volumes from larger storms.
Seeing a lot of sediment in your water? An easy sediment filtration system could be the solution.
Sediment in your water can ruin all of your appliances. The sediment that’s present in city or well water might end up clogging the systems, valves and fixtures throughout the entire house as well as any irrigation system you have installed on site due to its abundance. It could even destroy hot-water heaters for both private homes and businesses alike!
Sediment risks are about protecting the appliances in your home, for both overall function and efficiency. Without taking proactive steps against sediment in your water, you may incur costly repairs down the line to fix or replace fixtures and appliances that have become clogged or damaged. With sediments from soil particles being a major contributor of this issue, plumbing professionals recommend installing a sediment filtration system.
This unit conserves water as backwashing is not required. Unit has double O-rings for superior sealing. Changing the filter is a simple 3 step process. This unit may be used for whole house or commercial applications removing sediment, turbidity, chlorine, and has a host of practical applications.
At National Water Service we only install the best non-proprietary equipment on the market. This allows customers flexibility in their water treatment choices both for installation & service. Contact National Water Service to learn more about Sediment Filtration and why in-home water treatment is the consumer friendly answer to your water wants and needs! If you are experiencing additional issues with your water, please visit our Water Quality Page.
Sediment filters work by trapping and removing particulate matter such as sand, silt, clay, and organic matter from water. They usually consist of a physical barrier (such as a mesh or a pleated material) that captures particles as water flows through it. The size of the particles that can be filtered out depends on the micron rating of the filter.
Yes, water filters can remove sediment. Specific sediment filters are designed to capture and remove particulate matter from water. However, not all water filters are designed for sediment filtration, so it’s important to use the correct type of filter for sediment removal.
Typically, sediment filters should be replaced every 3 to 6 months. However, heavy sediment or high water usage might require more frequent changes.
Look for decreased water pressure throughout the house. visible discoloration or cloudiness in the water, any unpleasant tastes or odors in the water, and look for a build-up of sediment in the filter housing or other parts of the plumbing system.
Sediment filters are primarily designed to remove particulate matter and do not typically remove bacteria or other microorganisms. For bacteria removal, a combination of filtration and disinfection methods, such as UV filters or chlorination, is required.
National Water Service has been providing residential & small commercial water treatment, plumbing & well pump services for over 45 years. We specialize in water treatment, filtration & purification solutions as well as general plumbing to ensure clean, safe water for our customers in Maryland, DC & Northern Virginia.
Mon - Thurs
7:00am - 5:00pm
Friday
7:00am - 4:00pm
Sat - Sun
Emergency Service Available
National Water Servicing Corporation — 2025 All Right Reserved ™
